SSBB on Wasp Fusion?
SSBB on Wasp Fusion?
Hey guys. I'm trying to play brawl from my iso using my new Wasp, but I get the "An error has occurred" screen after the wasp resets the wii. I know there was a way for it to work, but I can't seem to find any information on this issue. Any help would be appreciated .
I loaded my brawl iso onto an SD card using WBFS Manager 4.0 which scrubs the iso to reduce image size, if that helps any.
I loaded my brawl iso onto an SD card using WBFS Manager 4.0 which scrubs the iso to reduce image size, if that helps any.
Re: SSBB on Wasp Fusion?
To be brutally honest, I don't think we really know much about running Wii games on the WASP/WKF.
Re: SSBB on Wasp Fusion?
Ah okay. Is there somewhere else I should look? I mean... Everything else works just fine . I just cant figure out how to launch it without it giving me an error.
Thanks mate.
Thanks mate.
Re: SSBB on Wasp Fusion?
It's possible the issue is caused by it being dual layer. Try another dual layer game, make sure you're on the latest firmware too.
Re: SSBB on Wasp Fusion?
I just checked with another known dual layer disk that I dumped, and the same "An error has occurred" error shows up when I try to load it. As for firmware, my wii is running 4.3U and my wasp is says "SW Version: 1.5" and FPGA Version: 1.0"
Re: SSBB on Wasp Fusion?
You should update your WASP, the FPGA version has to match the menu version.
Re: SSBB on Wasp Fusion?
Okay.. The only update ive done so far was to the 1.5 firmware that Megalomaniac provided a link for. I don't remember seeing any way to update the FPGA version though. Sorry for the trouble but any help is appreciated
Re: SSBB on Wasp Fusion?
Okay thanks Streetwalker. But isn't that the same as the 1.5 from the download that Megalomaniac provided in another thread I made? viewtopic.php?f=16&t=2625
I probably did something wrong along the line but my wasp functions normally (to me at least)
I took that warning to mean do not start the process with 1.3 or 1.5, but start with 1.0 then update to 1.5
Also, the 1.5 USA update from your link says PAL in the WBFS manager that I use.
I probably did something wrong along the line but my wasp functions normally (to me at least)
I took that warning to mean do not start the process with 1.3 or 1.5, but start with 1.0 then update to 1.5
Also, the 1.5 USA update from your link says PAL in the WBFS manager that I use.
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: SSBB on Wasp Fusion?
FPGA version 1.0 is always displayed on WKF menuStreetwalker wrote:You should update your WASP, the FPGA version has to match the menu version.
Only the SW Version changes from 1.0 to 1.5
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
Re: SSBB on Wasp Fusion?
Okay that clears some confusion up. If that's the case, isn't my wasp already up to date? I have seen mention of a 1.9 version somewhere but nothing more than that. If I can't play my backed-up isos of dual layer games, its not a big deal for me because I have a small library of everything else lol. (On a side note, sweet avatar, Megalomaniac.)
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: SSBB on Wasp Fusion?
1.9 is wiikey1 i think
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving