Page 1 of 1
My Qoob is acting up.
Posted: Sun Apr 08, 2012 4:24 pm
by Air Conditioner
So recently whenever I solder up my qoob pro and turn everything on, there is no video output the only thing showing me that my qoob still even works is the green indicator LED is on. I'm 99% sure that my qoob is what's causing this because when I have it de-soldered my GC runs as normal and everything goes fine. Any suggestions as to what I should do? And it started when I tried to load swiss rev 124 (viper) onto the flash memory like emu_kidid told me to try because swiss-lz isn't currently working.
Re: My Qoob is acting up.
Posted: Sun Apr 08, 2012 4:34 pm
by _Nold_
Did you flash the qoob with a firmware? I had the same problem and as i connected it to the pc i saw that there was no firmware flashed to the chip...
Re: My Qoob is acting up.
Posted: Sun Apr 08, 2012 4:41 pm
by Air Conditioner
Are you speaking of the BIOS? If so then yes. I have tried re-flashing it several times.
Re: My Qoob is acting up.
Posted: Mon Apr 09, 2012 12:58 am
by emu_kidid
does the Qoob bios boot up? If so, then there's nothing wrong with the chip, I'll just need to fix swiss.
Re: My Qoob is acting up.
Posted: Mon Apr 09, 2012 1:19 am
by Air Conditioner
No the BOIS dosnt boot up. There is no video at all.
Re: My Qoob is acting up.
Posted: Tue Apr 10, 2012 8:07 am
by Dragoon
Mizumi wrote:And it started when I tried to load swiss rev 124 (viper) onto the flash memory like emu_kidid told me to try because swiss-lz isn't currently working.
I think that's ur problem, eventhough emu_kidid said it, he could have a lack of caffeine/nicotine/alcohol when he said that 
Anyway try flashing it with the latest qoob bios, maybe that will work.