UPDATE 03/11/21

- Current needed space is 14 blocks due to changes in the libraries/toolchains. Nothing can be done about that if you want SD2SP2 support.
- Recompiled with libogc2, which fixes not being able to mount sd2sp2 device if the program is ran again after boot (because why not).


SD2SP2 support added by NiHuShu
It might take a while for it to load because it checks for both memcard slots.

Original Readme.txt:
Brosexec 0.1 by suloku '15
**************************

This is a simple dol that will load autoexec.dol from the root of a SD card in a SDGecko adapter. It's main purpose is to be used with the Home Bros. Exploit, as a way to boot homebrew on unmodified consoles. One of its goals is to keep used space in the memory card as low as possible.

Uses libfat 10.0.14 and thus supports FAT32 and SDHC.

Currently the needed space is 11 blocks on the memory card.


- Check the Home Bros. exploit here: http://www.gc-forever.com/forums/viewtopic.php?f=38&t=3023

- Check swiss here: https://github.com/emukidid/swiss-gc

_____________________
suloku 15'
