This is a "small" dol loader that will load autoexec.dol form the root of the SDcard on a SDGecko on a gamecube. If there's no SDGecko in slot A, it will load from slot B.

The base source code is from FIX94's gbiargs, I only modified it to load a dol from sdcard.

boot.gci is a compressed dol file with Dollz3, the converted to gci with dol2gci, it will take up 11 blocks on the memory card.


The program will automatically boot fat:/autoexec.dol after 3 seconds if no button is pressed.
If the corresponding dol file for the pressed button is not found, fat:/autoexec.dol will be boot instead.

Here is the list of available paths and the corresponding button

fat:/autoboot/autoexecA.dol	--> A button
fat:/autoboot/autoexecB.dol	--> B button
fat:/autoboot/autoexecX.dol	--> X button
fat:/autoboot/autoexecY.dol	--> Y button
fat:/autoboot/autoexecU.dol	--> Dpad Up
fat:/autoboot/autoexecD.dol	--> Dpad down
fat:/autoboot/autoexecL.dol	--> Dpad left
fat:/autoboot/autoexecR.dol	--> Dpad right
fat:/autoboot/autoexecZT.dol	--> Z button
fat:/autoboot/autoexecLT.dol	--> L trigger (full press)
fat:/autoboot/autoexecRT.dol	--> R trigger (full press)
fat:/autoboot/autoexecS.dol	--> Start button

_________________
suloku 15'