Page 1 of 1

GCMM and GC2SD adapter

Posted: Thu Jun 27, 2024 9:34 pm
by Darukkubitto
Hi guys,

I just had an issue my SD card with Swiss on it got corrupted and I had to reformat and redownload all my games. After that I configured everything again and when I started playing it seems for some reason my memory card (third party with several internal card to switch between them) also got wiped for some reason.

I found this homebrew app: https://github.com/suloku/gcmm to backup your memory card to your SD, I saw that is compatible with SDGecko but I can't find if it will work with my GC2SD adapter I use in slot B to load up Swiss. Have anyone tried it that way? Any informacion about this would be much appreciated.

Thanks!

Re: GCMM and GC2SD adapter

Posted: Fri Jun 28, 2024 10:10 am
by Andross89
Darukkubitto wrote: Thu Jun 27, 2024 9:34 pm Hi guys,

I just had an issue my SD card with Swiss on it got corrupted and I had to reformat and redownload all my games. After that I configured everything again and when I started playing it seems for some reason my memory card (third party with several internal card to switch between them) also got wiped for some reason.

I found this homebrew app: https://github.com/suloku/gcmm to backup your memory card to your SD, I saw that is compatible with SDGecko but I can't find if it will work with my GC2SD adapter I use in slot B to load up Swiss. Have anyone tried it that way? Any informacion about this would be much appreciated.

Thanks!
Many applications for the GameCube were created at a time when only SDGecko existed.

You would need to look for someone capable of updating these applications.

But you said you are using slot b... If the SD card is formatted in FAT32, in theory, it should work too.

Re: GCMM and GC2SD adapter

Posted: Sat Jun 29, 2024 8:44 pm
by Darukkubitto
Andross89 wrote: Fri Jun 28, 2024 10:10 am
Darukkubitto wrote: Thu Jun 27, 2024 9:34 pm Hi guys,

I just had an issue my SD card with Swiss on it got corrupted and I had to reformat and redownload all my games. After that I configured everything again and when I started playing it seems for some reason my memory card (third party with several internal card to switch between them) also got wiped for some reason.

I found this homebrew app: https://github.com/suloku/gcmm to backup your memory card to your SD, I saw that is compatible with SDGecko but I can't find if it will work with my GC2SD adapter I use in slot B to load up Swiss. Have anyone tried it that way? Any informacion about this would be much appreciated.

Thanks!
Many applications for the GameCube were created at a time when only SDGecko existed.

You would need to look for someone capable of updating these applications.

But you said you are using slot b... If the SD card is formatted in FAT32, in theory, it should work too.

Yes! I just went ahead and gave it a shot and it worked! in case this is useful to someone in the future! Thanks!

Re: GCMM and GC2SD adapter

Posted: Sun Jun 30, 2024 11:04 am
by Andross89
Darukkubitto wrote: Sat Jun 29, 2024 8:44 pm Yes! I just went ahead and gave it a shot and it worked! in case this is useful to someone in the future! Thanks!
Good formatting is everything. I always suspect that many problems here have something to do with this.

And Rufus is the best program I've used to date.