PSOload problem...
PSOload problem...
So Ive done as instructed but the gamecube just freezes and I see this on my computer
Established a connection with PSO successfully!
Sending GC program file E:\Program Files (x86)\Phoenix\mgsgcl.dol to PSO client... Please wait!
That's all I get...
Established a connection with PSO successfully!
Sending GC program file E:\Program Files (x86)\Phoenix\mgsgcl.dol to PSO client... Please wait!
That's all I get...
Re: PSOload problem...
So Ive managed to get past the frozen screen and I get the what Im assuming is the interface software to load on the GC, however, when it goes to start the game it either freezes or tells me initialization error...
Re: PSOload problem...
What do you plan to do with PSO Load?
Are you trying to boot homebrew the oldschool way just for fun?
Or are you just not aware (as we could've seen recently) that there are so many other ways to achieve this, way effortless, and with much better results regarding speed and compatibility.
Are you trying to boot homebrew the oldschool way just for fun?
Or are you just not aware (as we could've seen recently) that there are so many other ways to achieve this, way effortless, and with much better results regarding speed and compatibility.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Re: PSOload problem...
Im looking to play GC game ISOs off my computer. I bought the Phantasy game and the network adapter just for it.Papy.G wrote: ↑Fri Dec 20, 2019 10:39 amWhat do you plan to do with PSO Load?
Are you trying to boot homebrew the oldschool way just for fun?
Or are you just not aware (as we could've seen recently) that there are so many other ways to achieve this, way effortless, and with much better results regarding speed and compatibility.
Re: PSOload problem...
That's been rendered obsolete by Swiss and its support for the File Service Protocol. I put a lot of work in that.
Re: PSOload problem...
Ok... So what can I do that wont require me to buy anything else and will allow me to play the games off my computer? I did initially look for swiss but I couldn't find it
Re: PSOload problem...
Too bad you didn't find up-to date information first, and hope you didn't have to fork out too much for the BBA. Still, it is something that can be of some use, at last, or can be sold pretty much easily.
It's the proof of internet search engines limits: they aren't able to sort out the most pertinent and up to date information. I fell into that when looking for the latest emulators on the Gamecube.
If you have one of the games that can be hacked with the save exploit technique, you have to go on with PSOload to first be able to run GCMM. If you have a GC compatible Wii (or can borrow it to relatives), it will be easier.
SWISS takes 150 blocks on a memcard, so you may need an SD card adapter (regular SD to Memcard or µSD to serial port, underneath the GC, if you don't have a DOL-101) such adapters may be found for $ 2-3, the SD2SP2 can be build from parts, as can be seen in the video linked in my signature.
Some of the exploitable games can be found for $10 or less, 007AUF, for example.
Links:
SWISS's github releases page
How to boot homebrew (GC forever WIKI)
SD2SP2 from citrus3000psi's store If you wanna thank him for doing this at first, chinese have those for less than $2 free shipping.
For the memcard to SD adapter (SD Gecko), the cheapest I can find are on eBay little more than $2 shipping included, they are a little more expensive than the SD2SP2 and prevents the use of the Microphone, but work on Wii, and take regular size cards.
It's the proof of internet search engines limits: they aren't able to sort out the most pertinent and up to date information. I fell into that when looking for the latest emulators on the Gamecube.
If you have one of the games that can be hacked with the save exploit technique, you have to go on with PSOload to first be able to run GCMM. If you have a GC compatible Wii (or can borrow it to relatives), it will be easier.
SWISS takes 150 blocks on a memcard, so you may need an SD card adapter (regular SD to Memcard or µSD to serial port, underneath the GC, if you don't have a DOL-101) such adapters may be found for $ 2-3, the SD2SP2 can be build from parts, as can be seen in the video linked in my signature.
Some of the exploitable games can be found for $10 or less, 007AUF, for example.
Links:
SWISS's github releases page
How to boot homebrew (GC forever WIKI)
SD2SP2 from citrus3000psi's store If you wanna thank him for doing this at first, chinese have those for less than $2 free shipping.
For the memcard to SD adapter (SD Gecko), the cheapest I can find are on eBay little more than $2 shipping included, they are a little more expensive than the SD2SP2 and prevents the use of the Microphone, but work on Wii, and take regular size cards.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Re: PSOload problem...
The Broadband Adapter is definitely worth it. The new read patches were and are made for it. SD cards are a secondary target.
Re: PSOload problem...
Yeah... I downloaded swiss, no idea how to use it, and I checked out fspd… No idea what to download or how to use it... is there a video I can watch? I have always had a hard time learning by reading... Im a hands on type person, if I see it done I can easily do it but just reading how to do it is extremely difficult for me.
Re: PSOload problem...
Anyone? AllI was told it use this program ans this program.... with no instructionon how?
Re: PSOload problem...
In a general manner, you have to understand a minimum of what is happening when you dive into homebrew, so reading is usually the key. While it seems slightly complicated at first sight, it is way easier now than back in the days.
I don't have PSO nor a BBA, but I suspect you have to do somehing like:
Set up the PSO Load thing and find a way to send SWISS instead of mgsgcl.dol, remaming SWISS.dol as mgsgcl.dol in its directory (E:\Program Files (x86)\Phoenix\mgsgcl.dol).
Then, setup a FSP server for SWISS to load ISOs off it.
May I be off, please someone correct me.
I don't have PSO nor a BBA, but I suspect you have to do somehing like:
Set up the PSO Load thing and find a way to send SWISS instead of mgsgcl.dol, remaming SWISS.dol as mgsgcl.dol in its directory (E:\Program Files (x86)\Phoenix\mgsgcl.dol).
Then, setup a FSP server for SWISS to load ISOs off it.
May I be off, please someone correct me.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Re: PSOload problem...
Firstly, grab the latest version of Swiss from the github releases page.
1. Boot Swiss from whatever homebrew method you may have (it sounds like it's going to be psoload).
2. Start FSPD on your PC (noting the port it's running on etc, some pre-compiled windows binaries only run on port 80 despite you forcing a port)
3. In Swiss, enter the settings menu, configure your save device on the first page. Go to the second page of the settings, enable "Initialise network on startup", also fill out the FSP details, if you're using it without auth, just put anything into the username/password fields. Hit save.
4. Go to the device selection menu (hit the eject symbol on bottom left hand side of the screen), select FSP, see if you can launch games.
1. Boot Swiss from whatever homebrew method you may have (it sounds like it's going to be psoload).
2. Start FSPD on your PC (noting the port it's running on etc, some pre-compiled windows binaries only run on port 80 despite you forcing a port)
3. In Swiss, enter the settings menu, configure your save device on the first page. Go to the second page of the settings, enable "Initialise network on startup", also fill out the FSP details, if you're using it without auth, just put anything into the username/password fields. Hit save.
4. Go to the device selection menu (hit the eject symbol on bottom left hand side of the screen), select FSP, see if you can launch games.