Hey
I have read it's possible to install a Pluto mod internal HDMI in dol-101. Anyone Weaver try this have any information pinouts etc.
HDMI internal mod dol-101
-
- Posts: 1
- Joined: Wed Aug 30, 2023 2:58 pm
Re: HDMI internal mod dol-101
Due to the pluto boards' prices getting sky high, we may have better buying a cheap gc plug to rip off its enclosure and 3D printed connector to direct solder it, then hide it in the case's cavity where the DC regulator's board used to be on the DOL-001, and deport the hdmi out with a little mini to full size hdmi adaptor.
Unfortunately, "integrated" solutions are too pricey, and need to sacrifice the analog output connector (it's a no-go to my point of view, as on PAL systems, you'll lose the RGB ability, to begin with)
Unfortunately, "integrated" solutions are too pricey, and need to sacrifice the analog output connector (it's a no-go to my point of view, as on PAL systems, you'll lose the RGB ability, to begin with)
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)