IDE-EXI Gerbers, Design Files, BOM, PDF and Program Files
IDE-EXI Gerbers, Design Files, BOM, PDF and Program Files
Since I won't have the time anymore in the near future to make another batch of IDE-EXI's, as promised, here are all the necessary files which were used to make the IDE-EXI that was sold to the public.
The contents of the .ZIP include:
- Design files (open with Altium Designer Viewer)
- Gerbers
- BOM
- PDF
- JED and UCF for the IDE-EXI (to program it with)
The source can be found elsewhere for the code on the chip (but remember to use the correct UCF):
http://gc-forever.com/files/gcide.zip
The contents of the .ZIP include:
- Design files (open with Altium Designer Viewer)
- Gerbers
- BOM
- JED and UCF for the IDE-EXI (to program it with)
The source can be found elsewhere for the code on the chip (but remember to use the correct UCF):
http://gc-forever.com/files/gcide.zip
- Attachments
-
- IDE-EXIdesignfiles.7z
- (1.21 MiB) Downloaded 2576 times
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Didn't realize, but I've also attached my .ucf (pin assignments) file for the IDE-EXI design.
- Attachments
-
- gc_ide.ucf.zip
- (416 Bytes) Downloaded 1971 times
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Sent the files off a week and a half ago, soldered them today. The decoupling cap got stuck under the memory card cover. I now see why you don't have them soldered.
Anyway, thanks for the Gerber files!
Anyway, thanks for the Gerber files!
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
very nice, can I see some pictures of how yours turned out!
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
- Attachments
-
- CIMG0068-1.jpg
- (25.35 KiB) Not downloaded yet
-
- CIMG0067-1.jpg
- (24.18 KiB) Not downloaded yet
-
- CIMG0066-1.jpg
- (31.63 KiB) Not downloaded yet
-
- CIMG0065-1.jpg
- (35.87 KiB) Not downloaded yet
Last edited by dilav on Sun Mar 25, 2012 1:41 am, edited 2 times in total.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
nice! even with the kind "thank you" words
how many did you make?
how many did you make?
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
It was for personal use, so I had five boards made since price increase isn't much.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
yeah i guessed! when i had boards made for another project 2 were the same as 8dilav wrote:It was for personal use, so I had five boards made since price increase isn't much.
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Nice looking boards! how much did each unit end up costing with all parts?
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Yeah, it's not worth their time to setup and make single boards so small additional of boards doesn't cost too much. It's a pain to get a single prototype of a board cheaply.
Not sure how much each board cost since I had other boards made and such, but I would guess it to be around $10-15 depending on how shipping cost got split up.
Not sure how much each board cost since I had other boards made and such, but I would guess it to be around $10-15 depending on how shipping cost got split up.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
anybody interested in another batch? i get at least one mail in 10 days asking for one
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I'd take 2 or 3 if we have a new batch made.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I'm looking at getting another 100 made perhaps, cost would be about $10 less each to sell them as I save on certain setup fees with the PCB company..
But I'd need a few pre-orders first..
But I'd need a few pre-orders first..
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I didn't know there are still demand in these things. Thought all the attention went to the Wode.
Then again the design files had been downloaded 265 times throughout the year, wonder if anyone else had them fabricated.
Then again the design files had been downloaded 265 times throughout the year, wonder if anyone else had them fabricated.
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I dont think that there is less demand, cause if Emu is finish with his DMA support the IDE EXI is nearly that fast as the Wode. Emu I would buy one or two.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
pre-order is a good idea. or an interest check.
and i didnt see any chinese pirate builds of this yet...
and i didnt see any chinese pirate builds of this yet...
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I would definately take one if you make a new Batch
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
i just counted emails etc. and i think i alone could definetly sell around 50 of them
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Okay, let's say we let them produce 60 here in germany for example.
Then it would cost us about 700€ for the pcb's with both layers, coating, paint, and the smd components already soldered.
Additionally we need to buy the chips and other hardware parts, which will cost about 300€.
Then add some shipping costs and a bit foobar and we are at ~25€ per piece.
(Let's do it like assembler and start raising funds, lol )
Then it would cost us about 700€ for the pcb's with both layers, coating, paint, and the smd components already soldered.
Additionally we need to buy the chips and other hardware parts, which will cost about 300€.
Then add some shipping costs and a bit foobar and we are at ~25€ per piece.
(Let's do it like assembler and start raising funds, lol )
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I have it at about $1200 for 100 fully made if I re-use the same factory as before (excluding postage fees for the xilinx back and fourth from supplier to factory and then the ide-exi's themselves to me and to you), so about $15-$20 each.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Another batch???!!! Man, if I would have predicted this, I would have waited a little more to save some $$...anyway, more ide-exi users means there will be more new/updated homebrew for this adapter.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
If my homemade will not work, i will take one, too ^^
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |
| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |
| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
that sounds a lot better than what infact postedemu_kidid wrote:I have it at about $1200 for 100 fully made if I re-use the same factory as before (excluding postage fees for the xilinx back and fourth from supplier to factory and then the ide-exi's themselves to me and to you), so about $15-$20 each.
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
-
- Posts: 20
- Joined: Sun Mar 20, 2011 9:00 pm
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I would be interested in working out a deal with this. I had plans to get a batch myself and have been toying with an enclosure as well.
Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
I would pre-order another one.